Difference between revisions of "Building Automation"

From Cyber-Physical Systems Laboratory
Jump to navigationJump to search
Line 34: Line 34:
 
* [https://www.rdb.ethz.ch/projects/project.php?proj_id=17833 ETH Building Automation Project]
 
* [https://www.rdb.ethz.ch/projects/project.php?proj_id=17833 ETH Building Automation Project]
 
* [http://www.millennialnet.com/resources/industrynotes/IndNote_BuildingAutomation.pdf Millennial Net MeshScape]
 
* [http://www.millennialnet.com/resources/industrynotes/IndNote_BuildingAutomation.pdf Millennial Net MeshScape]
 +
* Suet-Fei Li, Vlado Handziski, Andreas Köpke, Martin Kubisch, Adam Wolisz (TU Berlin) [http://www.tkn.tu-berlin.de/publications/papers/sensors2005_v3.pdf A Wireless Sensor Network Testbed Supporting Controlled In-building Experiments], In Proc. of 12 Sensor Kongress, May 2005.
  
  

Revision as of 03:24, 5 May 2008

Building Automation using WSNs

Building automation was identified, a few years ago, as an effective way of achieving (a) efficient long-term building management and (b) considerable reductions in building energy costs. Some already installed building automation systems (BAS) have successfully achieved between 20% to 80% reductions in energy cost, increased occupant security/safety, increased occupant comfort and a reduction in building operations cost. Although several BAS have been installed so far, they have not yet achieved significant market penetration nor have they been utilized to their full potential. This is due to the existence of several unresolved issues like:

  • interoperability between individual sub-systems like HVAC control, lighting control etc.
  • use of wireless sensors that facilitate reduced installation/wiring cost
  • increased information sharing between the various sub-systems
  • integration with installed IT enterprise networks
  • better application modeling and deployment toolkits
  • increased system reliability
  • better algorithms and optimization techniques
  • real time monitoring and analysis


We try to address some of these issues by exploring the feasibility of using WSNs for building automation. The use of wireless sensor networks for building automation enables high-density sensing and control at lower operational costs and could therefore enable more efficient building management. The figure, above, shows an example of a WSN deployment for building automation.


Sensors


Resources


Companies

People

This work is being conducted by Sangeeta Bhattacharya, a current PhD student, under the guidance of Dr. Chenyang Lu and Dr. Gruia-Catalin Roman.