Equipment for course projects
The following is a list of sensor network equipment available for use in students' course projects.
TelosB-Family
TelosB data sheet IEEE 802.15.4 radio, TI MSP430 uProcessor, Integrated antenna, Integrated USB (no need for a programming board).
Sensors: Temperature, light, and humidity.
Quantity: 43
The Tmote Sky and TelosB are functionally equivalent. Any hardware or software information about the TelosB motes also applies to the Tmote Sky.
- EasySen SBT80 Expansion sensorboard for TelosB.
Sensors: Visual light, infrared, acoustic, temperature, dual-axis magnetometer and dual-axis accelerometer.
Quantity: 3 (1 is soldered and need to be removed). More can be ordered. (For reliability, you may need to solder a socket onto the TelosB expansion holes on the PCB.)
MICA-Family
IEEE 802.15.4 radio, Atmel ATmega128 uProcessor, requires a programming board.
Quantity: 32
- MIB510/520 MICA-Family Programming Boards.
Quantity: 7, only 5 power supplies, and no cables. Also available 4 boards with unknown function (should not be hard to find out).
- MTS310CA MICA-Family Sensor Board, with
Dual-Axis Accelerometer, Dual-Axis Magnetometer, Light, Temperature, Acoustic, and Sounder.
Quantity: 6 (1 wo Mic.)
- MTS420CA MICA-Family Sensor Board, with
Temperature, Humidity, Barometric Pressure Ambient Light Sensors, Dual-Axis Accelerometer, and GPS
Quantity: 1
Robots
- PPRK Robot, quantity: 1
- LEGO Mindstorms Education Base Set, LeJOS firmware:File:Lego.pdf quantity: 2
Other Available Equipment
- Protoboards (Breadboards)
Quantity: 6
- Wall plug to USB adapter
Quantity: 29
- Particle sensor
Quantity: 1
- Power meter
Quantity: 1
- Car OBD-II devices
- 2 "OBD-II to DB9" cables.
- "OBD-II to UART" kits
- 2 sparkfun brand OBD-II UART boards
- 2 USB-UART serial converters
- 2 ribbon cables.
