Tips on Using Imote2

From Cyber-Physical Systems Laboratory
Revision as of 22:02, 10 January 2008 by Fs2 (talk | contribs) (New page: * When sending over UART, make sure the debug board is connected.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
  • When sending over UART, make sure the debug board is connected.
Retrieved from "http://wsn.cse.wustl.edu/index.php?title=Tips_on_Using_Imote2&oldid=383"