Equipment for course projects

From Cyber-Physical Systems Laboratory
Revision as of 20:20, 20 September 2012 by Msha (talk | contribs)
Jump to navigationJump to search

The following is a list of sensor network equipment available for use in students' course projects.

TelosB-Family

  • TelosB/Tmote Sky IEEE 802.15.4 radio, with temperature, light, and humidity sensors, quantity: 25
Telos SM.jpg


Tmote-sky-blue.gif


(Note: the Tmote Sky and TelosB are functionally equivalent. Any hardware or software information about the TelosB motes also applies to the Tmote Sky.)

SBTwT2.jpg


(For reliability, you may need to solder a socket onto the TelosB expansion header.)

MICA-Family

  • MPR410CB Mica2 mote, 433Mhz radio, quantity: 40
MICA-Family.jpg


MTS400 Sm.jpg


  • MIB510CA MICA-Family Programming Boards, quantity: 5
Mpr510.jpg


  • MTS310CA MICA-Family Sensor Board, with speaker, quantity: 2
  • MTS310CA MICA-Family Sensor Board, with accelerometer and magnetometer, quantity: 2
MTS310CASensorBoard Sm.jpg


Robots

R141-PPRK-BS-2.jpg


9797-0000-xx-12-1.jpg


Other Available Equipment

Nslu2.png


  • Car OBD-II devices
    • 2 "OBD-II to DB9" cables.
    • "OBD-II to UART" kits
      • 2 sparkfun brand OBD-II UART boards
      • 2 USB-UART serial converters
      • 2 ribbon cables.


TinyOS 1.x-Only Equipment

This equipment is not supported by TinyOS 2.0. The TA will be unable to offer assistance with TinyOS 1.x. We offer this equipment for advanced students who are willing to debug their projects without the TA's assistance.

Cricket.jpg


This equipment was made possible by NSF ITR Grant CCR-0325529.